How to install a fence post for ages

Hello everybody! I want to show how to properly install the fence posts, as there is not very much information on the Internet. If you put pillars on this technology, then your fence will be strong, smooth, and most importantly will stand for a very long time. The method provides full stability and stability as a result of top movement of the soil, protects from rising due to changes in natural seasons and temperatures.

Installation of a fence post

Preparing a pole. This is a 50x50 shaped tube, with a wall thickness of 3 mm. If you choose it, you should never save money, as this is the main support of the future fence.
How to install an intake pillar for centuries
Pipe length is 3.5 meters.
How to install an intake pillar for centuries
In the part of the pipe that will be in the ground it is necessary to make a rectangular cutout with a grinder. The dimensions are arbitrary: from the edge of 12 cm and the length of the notch is 12 cm. It is done so that the cement penetrates into the pipe, hardens and becomes one piece.Due to this, it will be impossible to separate the pillar from the frozen cement lump.
How to install an intake pillar for ages
Then we prepare the well for filling and installation.
How to install an intake pillar for centuries
The well must be deep. Insert the pipe, make a notch.
How to install an intake pillar for centuries
Next, measure with a tape measure, it turns out about 156 cm.
How to set the fence on the pillars for ages
Now measure the mark to a depth of 70 cm and take a white tape for clarity.
>img src="https://sdelaysam-svoimirukami.ru/uploads/posts/2018-06/medium/1528277953_7.jpg" style="max-width: 100%;" alt="How to install the fence pillar for centuries">
To prevent the column from protruding in the winter, concreting must be done in two diameters.
How to install an intake pillar for centuries
These two diameters will be set using a drill with a diameter of 18 cm (bottom diameter):
How to install an intake pillar for centuries
And PVC pipes 110 cm (upper diameter): How to install an intake pillar for centuries
That is, up to the mark with white insulating tape below, concreting with a diameter of 18 cm will be performed.
How to install an intake pillar for centuries
And then a plastic pipe is put on the profile and concreting is performed after the mark with a diameter of 11 cm.
How to install an intake pillar for centuries
The outer part around the plastic pipe will be filled with sand and gravel filling. At the final stage, the intake column will look like this:
How to install an intake pillar for centuries
Before proceeding with the installation of a pole, it is necessary to remove water from the well that appeared there in greater probability. This can be done with the help of a simple device.

Related News


How to become a judge in the Russian Federation - instructions and tips
Matchbox chair
How the magazine Vogue US fell out with bloggers
Learning the Frog
Why not drink after meals
Features breed Irish Wolfhound
Secrets of cooking this cheeseburger