How to make a mobile saw with your own hands

Residents of private houses, travelers, lovers of relaxation in nature and those who decide to do minor repairs themselves in the work need a handy toolkit. Manual devices for cutting, cutting and cutting often take up a lot of space and are inconvenient, and professional equipment is expensive. To combine budget and comfort in use will help mobile saw, which can be done independently. A small hand saw will work on batteries, so there is no need for gasoline and noise insulation during use.

Watch the video

Features of a mobile power saw:

1. Multifunctional. The tool can be used for cutting, cutting and sawing medium-hard materials (boards, wood and other building resources). 2. Variations of the connection and type of power device.The instruction assumes that the user can choose a convenient way to recharge (power supply or car battery). 3. Simple and safe transportation tools. Small size and light weight make the saw a reliable accessory for outdoor activities and not only.

Making electric saws

List of required materials:
  • Plywood sheet or chipboard.
  • Engine 12 or 24 Volts, takeHERE.
  • Adapter for cutting tools.
  • Chain and tire of small size.
  • Belt drive.
  • Asterisk (leading for chainsaw).
  • A piece of PVC pipe and two plugs and a corner to them.
  • Corners for fasteners (aluminum alloy).
  • Bearings (2 pieces).
  • Axle (steel).
  • Akku mutilators to choose from.
  • Fixing hand tools (bolts, nuts, screws and others).
  • Power button.

These consumables are freely available in hardware stores, the engine and other electrical components can be purchased at the radio market. What tools do you need to work?
  • Drill and drilling machine.
  • Sharpened.
  • Hacksaw for metal.
  • Jigsaw.
  • Vice.
  • Wrench.
  • Bulgarian.
  • Caliper.
  • Tricks for marking (markers,rulers, and so on.
You can use an amateur tool to fulfill this instruction, its power will be enough.

How to make a mobile power saw with your own hand in 10 actions?

• The first step is to prepare an adapter for the asterisk. In the power saw, the necessary component is a belt reduction gear. The asterisk in the mechanism plays the role of a torque that is transmitted to the driven shaft. To secure it on a thin steel axis, you must use an adapter. This component is used for the saw, so it needs to be slightly modified: take measurements, fix the product in a vice, and cut out the slots. After that, you can install an asterisk and tighten it tightly with a nut. All fasteners of this design consist of two screws. How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to dodo-it-yourself mobile saw
 How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
 How to make a mobile saw with your own hands
 How to make a mobile saw your own Ukami
 How to make a mobile saw with your own hands
 How to make a mobile saw with your own hands
 How to make a mobile saw with your own hands
 How to make a mobile saw with your own hands
 How make a mobile saw with your own hands
 How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
 How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own handsHow to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands • The second step is to make a frame. This is one of the main parts of the future tool, because the engine and gearbox are mounted on it. To make it you need plywood or sheet of chipboard of the desired size, in which you need to drill holes for fastening. To work at this stage, use a jigsaw.
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
• Step three - fixing the engine and gearbox. On the frame you need to make a seat to safely hide the mechanism. The bits are used for the undercut, the drilling machine, and at the end it is also necessary to drill the holes for the screws. When these preparatory processes are completed, you can tighten the motor. Then, an axis is installed: the required segment is mounted on the driven pulley with further placement on the bearings, which then must be pressed into the frame.
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
• The fourth action is to add to the tire design. In order for the tire to be on a level with an asterisk, it is necessary to take an additional piece of board, cut the part and fix it with liquid nails or self-tapping screws.To fasten the tire to the structure, bolts with nuts and screws are used; when wrapping, it is important to ensure that the chain is installed correctly. At this stage, you can try to start the saw, before it is treated with engine oil.
How to make a mobile saw with your own hands
How to make a mobile saw with your own handsHow to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own handsHow to make a mobile saw with your own handsHow to make a mobile saw with your own hands
How to make a mobile saw with your own hands
• The fifth action - setting protection for the gearbox. A casing is made of plastic or a thin sheet of metal, which will perform several functions - to protect the gearbox and serve as a seat for the power supply. The casing is done like this: a sheet of the right size is cut, bent and fastened to the frame with self-tapping screws.
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
• The sixth step is to mount the batteries.Batteries are attached to the protective cover with construction tape.
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
• The seventh action is the creation and fastening of the handle. For the handle use pipes, PVC corners, which are cut to size, glued together and set with screws or rivets. In the handle you need to install the power button in the form of a key: cut a place, hold the wires and fix with hot glue.
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
• Action eight - connection.The wires are attached with a soldering iron between the battery and break the switch through the plug.
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
• The ninth action is the manufacture of casings for tool durability. To the engine is not clogged with sawdust and other debris, it is necessary to put a piece of pipe on it. A cap with a large number of holes for heat exchange and ventilation is installed on top of it.
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
• Action Tenth - testing and getting started. The finished tool is lubricated with an oil can and it is included; it is important to monitor the tension of the chain in the mobile power saw. The presence of a lubricant is necessary, otherwise, the tire will quickly become unusable.
How to make a mobile saw with your own hands
How to make a mobile saw with your own hands
The electric saw will last longer with accurate handling: regular lubrication during use, no overloads and long-term work, which is accompanied by overheating of the system.It is important to monitor the cleanliness and serviceability of the chain sharpening, then the tool will work properly over a long period.

Related News


Using the Internet at work
Types of anti-cellulite massage
How to excite a man
Tyra Banks admitted that she did rhinoplasty
Striped Rattle Ball
Keith Harington and Rose Leslie will get married in less than a month