Drawing a Fantasy Map (part 1)
How to Make a Map
Ever want to make a map to flesh out your fantasy novel, or make a personal memento of a place you visited? With just a bit of planning and designing, you'll be a regular cartographer in no time!
Designing Your Map
Determine the scope of your map.Before you start drawing, you need to decide just how large of a map you’re going to create. Do you plan on showing an entire planet (perhaps even Earth) stretched out, a hemisphere, a single continent, a country, or just a state or city? This goes for both true-to-life maps and fantasy maps that you create from your imagination.
Decide on the ratio of land to water for your map.With very few exceptions, you will need to create a map (unless it’s an extreme close up) that includes both water and land. However, you’ll need to decide exactly how much of each you’re showing. For larger scale maps, you should be showing oceans, rivers, and lakes. Smaller scale maps may only show portions of an ocean, rivers, or a few lakes and ponds. If your map has only a few landmasses in an archipelago-type setting, you’ll likely have a page that is mostly water with a few islands.
Consider what you’ll include on your map.What style of map are you creating - geographical/physical, political, a road map, or something else? The type of map you make may change the way you outline or draw it, so determine this prior to starting your project. You can certainly create a map that is a combination of all three, but you’ll have to reduce the amount of detail you include in order to avoid overwhelming the viewer.
- You can create maps based on other characteristics as well, such as trade routes, major population points, or different languages.
Determine how detailed your map will be.This goes hand in hand with determining what you’ll include/the scale of your map, but is important to note. Do you plan on only marking off the largest or most important places on your map? Or, are you interested in showing even the smallest aspects of the are you’re portraying? The detail you intend to include may have a big impact on how big you physically draw the map (on a very large piece of paper/file, or a small file size or piece of paper).
Think about weather patterns.Although this applies mainly to those creating their own fantasy maps, thinking about weather patterns is important to designating certain physical aspects on your map. Where will there be lots of rain or desert areas? Will these areas match up with the locations of seas/oceans, mountain ranges, and the location on the planet (as they do in real life)? You might consider the climate/environment and weather patterns of certain areas before sketching them out, to make a more detailed and realistic map.
Choose how you’re going to create your map.Do you plan on hand-drawing your map, using a computer program to draw it, or creating your map using an online interactive map creator? Each of these will require different preparations, particularly if you intend on hand-drawing it. There are dozens of online map-making programs as well, if you’re not interested in doing so much work or aren’t certain of your artistic capabilities.
Drawing Your Map
Outline your landmasses.If you’ve already decided how detailed your map is going to be, you should have a good idea of how many landmasses you’re drawing and their general size. Start with just a rough outline using straight lines to sketch out the landmasses. When you’ve gotten the outline just the way you want it, go over it again to create a more detailed outline (typically a bit wavy) depicting coasts and borders.
- When outlining your landmasses, consider where tectonic plates (imaginary or real) would lie underneath. This will help you to form more a more realistic map, assuming you’re drawing it from your imagination.
- Add details like peninsulas, islands, archipelagos, deltas, or inlets to your main land masses.
Add your waterways.It is typically assumed that the area around your land masses are oceans or other large bodies of water. However, now you should add in other smaller bodies of water or waterways that you may want to include. These typically are rivers, lakes, seas, canals, and bays. Depending on how detailed you get, ponds, streams, creeks, and coves may also be included on your map.
- If a body of water is small but important (such as a cove or a canal) you may choose to mark it on the map and note that it is out of scale.
Add details to your land masses.You may or may not add a lot of detail to your land masses depending on the style of map that you’re going for, but normally at least a little detail is added. Consider putting mountain ranges, valleys, deserts, forests, and plateaus on your land. Keeping weather patterns and climate in mind, you can add jungles, rainforests, swamps, tundra, grasslands, and coral reefs throughout your map.
Place countries or cities.Again, this will be different depending on the style of map you’re making, but it is generally helpful to add outlines for countries/territories and add a few major cities. Designate continental divisions, state lines, and territories with simple lines; these may follow natural boundaries like rivers or mountain ranges, or may be entirely of your own choice. You can show cities with a symbol of choice, typically a small dot of star.
Add color to your map.Maps are greatly enhanced with the addition of color. Color can show different styles of land mass (as in a physical map), show different countries (like a political map) or simply be decorative. If you choose not to add color, at least add shading in black and white/gray. You may add detailed layers of color to show specific items like cities or forests using a broad color palette, or you may use only 2-3 colors for basic differentiations.
Label your map.You aren’t technically required to add labels to a map, but it will be confusing indeed if you lack labels altogether. Start by labeling the largest and most important areas; you might show that these are the largest and most important by using a larger font/print than you do for the rest of your labels. If you want to create more detail, simply label more areas on your map. Use different styles of font to symbolize different types of labels, including italicized or bold font (or handwriting).
Create a key.The key is a small box that identifies the symbols or colors that you used throughout your map. These will help the viewer to understand what a type of line or mark means, as well as why you chose to use a particular color. Be sure to include every symbol you used in your key, so that you don’t confuse the viewers.
- The key is sometimes also called a legend.
Add a scale.The scale designates how many miles/kilometers are represented in a square inch/centimeter on the map. You can create a scale by drawing a small ruler on the bottom that shows how much distance is portrayed in a small section of area. You may also add an inset map of a zoomed in or zoomed out portion to show the scale more accurately. If you’d rather, you can add a ratio for your scale instead of drawing anything (such as 1”: 100 miles).
Show the orientation.You can show the orientation of your map by adding a compass rose on some portion of the blank space. This will show the way the directions work, such as North/South and East/West. This is particularly helpful if the orientation of your map is non-traditional, such as having North located near the bottom.
Add latitude and longitude lines.Latitude and longitude lines may not need to be used on a fantasy map, but are almost always required on a true-to-life map. These lines divide the map vertically and horizontally, so that specific locations can be found by looking at coordinates within these lines. Be sure that these lines are perfectly straight and evenly spaced.
Give a time/date.The area shown on maps, both physical and political, often change over time (even in a fantasy map). Therefore, you will need to make note of the time or date that the map is depicting somewhere on the page. You may also want to include the date that the map was originally drawn, although it is more important to make note of the date range the map depicts.
Add any further explanatory notes.You may be interested in writing a few explanatory notes on your map somewhere. These are not required, but are particularly helpful if your map is not a traditional set-up or if it is a fantasy map you have created. These traditionally go along the very bottom border of the map, so that the reader knows they are not meant to match up with a specific location on the map.
QuestionHow do I show a city?wikiHow ContributorCommunity AnswerYou may mark cities on the map with any symbol you like, like a dot or square.Thanks!
QuestionWhat is a cartographer?wikiHow ContributorCommunity AnswerA cartographer is someone who makes maps for a living. They usually make actual geographical maps, but sometimes they can be employed by to make fictional maps in books.Thanks!
QuestionHow can I make an easy map of Canada for an assignment?wikiHow ContributorCommunity AnswerWill your teacher permit you to trace the country's outline? That would be the easiest way to get started. Then you could fill in cities and towns and natural features.Thanks!
QuestionIs it a good idea to draw buildings in the map?wikiHow ContributorCommunity AnswerIt depends on the kind of map you're making. Most maps don't include buildings, but some city maps will include little pictures of a handful of the city's major buildings/constructions (such as the Empire State Building and Brooklyn Bridge in New York).Thanks!
QuestionHow do I draw a fantasy map of a journey to school/work?wikiHow ContributorCommunity AnswerDraw the map using whichever details, colors, and styles you'd like. Then, mark the path that the person took to school/work somehow, like using a dotted line.Thanks!
QuestionWhat is the process of making a map?Community AnswerCheck out the article. You should start by planning it out, then make a rough copy with little color and detail, and then make a copy with color, detail, and a key.Thanks!
I want to make a thematically designed map on languages. What can I do for bilingual places?
What is the best program to use to make a 2D digital map?
How do I draw an ancient map with geography on it?
How can I make big maps on small paper?
How do I put longitude and latitude lines on a map?
If you want to make a map, first determine the scale of the map. This will determine how much land you cover and the amount of detail included in the map. Start by drawing a rough outline of the landmasses and their general size, then go back over the outlines and add in detail along the coasts and borders. Add your waterways, then draw in details like mountain ranges and forests to your landmasses. If you like, you can add in borders, then label your map with the names of countries or cities and land features.
- Sketch your map on scrap first and then transferring the design to good paper.
- If it helps, do a scale of populations and area before you do the map. This will help the scale and overall effect. Whatever you do, try not to draw every single detail before you are happy with the other stuff.
- If you're going to create multiple maps of the same place, it is a good idea to draw a physical map with no labels, as landforms can, and often are renamed, and print out multiple copies.
- Create a key if you don't want to label the map.
- It helps to use a ruler to grid your map before you sketch it out.
Sources and Citations
In other languages:
Italiano: , Español: , Deutsch: , Português: , Français: , Nederlands: , Русский: , 中文: , Čeština: , Bahasa Indonesia:
Video: How to Make a Map | Geography for Kids | Made by Red Cat Reading
Chanel Soho Story Collection
How to Create a Garden Border with Broken Plate Pieces
10 Stylish Messy Short Hair Cuts: Attractive Women Short Hairstyles
How to Work As a Cook
Dermasorb AF Reviews
6 Best No-Fee Rewards Credit Cards
Stop Holding the Handrails on the Treadmill
News: Viola Davis’s Brilliant Beauty Secret 5 Reasons Not to Do aCleanse
Gorgeous DIY Statement Crystal Flare Necklace
High Fives For Taylor And Beyonce Your VMA 2015 Nominations List Revealed